Planborr

  • Aufnahmetyp, maschinenseitig: DIN 6535-HA
    Aufnahmetyp, maschinenseitig: DIN 6535-HA
    Aufnahmetyp, maschinenseitig: DIN 6535-HA
  • Bearbeitungstiefe: ~3xD
    Bearbeitungstiefe: ~3xD
    Bearbeitungstiefe: ~3xD
  • Ø-Toleranz: n7
    Ø-Toleranz: n7
    Ø-Toleranz: n7
  • Norm: Werksnorm
    Norm: Werksnorm
    Norm: Werksnorm
  • Oberfläche: nanoFIRE
    Oberfläche: nanoFIRE
    Oberfläche: nanoFIRE
  • Schneidrichtung: rechts
    Schneidrichtung: rechts
    Schneidrichtung: rechts
  • Typ: RT 100 FB
    Typ: RT 100 FB
    Typ: RT 100 FB
  • Spitzenwinkel: 180
    Spitzenwinkel: 180
    Spitzenwinkel: 180
  • Schneidstoff: VHM
    Schneidstoff: VHM
    Schneidstoff: VHM
  • Stempel: NEU
    Stempel: NEU
    Stempel: NEU
  • Innenkühlung: mit
    Innenkühlung: mit
    Innenkühlung: mit
180° point geometry for flat bottom of the hole • för pilotering, borrning, spegling • low burr development • piloting in all positions and materials
Artikel nr.
6596
Recommended use Spot drilling on flat surfaces: 1. Spot drill with a conventional solid carbide drill, e.g. art. 2477 on Ø FB of the following RT 100 FBor on Ø FB + 0.20 mm to apply a chamfer directly. 2. Insert the RT 100 FB at the full feed rate. Spot drilling or exiting on inclined surfaces:Up to 15° = reduce feed by 25 %, up to 30° = reduce feed by 50 %, and up to max. 45° = reduce feed by 75 %. When fully wrapped, the feed rate can be raised to 100 %
Saatavana useita muunnelmia
Laddar...